Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Oil heater fan IDS 100 from Trotec
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Oil heater fans of the IDS series
  5. IDS 100

Oil heater fan IDS 100

Powerful chimney oil heater for the mobile heating on construction sites, in the agricultural sector or in halls and workshops

Oil heater fan IDS 100
Oil heater fan IDS 100
Oil heater fan IDS 100

Professional oil heater fan IDS 100 for clean warmth on the spot

With a rated heat output of 117 kW and an air volume of 5,500 m³/h this professional oil heater fan allows for quick and effective heating applications in storage and production halls, workshops, greenhouses and on construction sites. Reliable continuous operation of the IDS 100 is ensured by the integrated oil burner with its Suntekpump.

The chimney oil heater made in Europe convinces by reliable operation, low maintenance costs and a high safety level. Owing to the double-walled housing with protective coating the surface temperature of the outer casing is reduced to a minimum, which means a decreased risk of injuries for the user. Moreover, the housing provides optimum soundproofing. The device is equipped with an electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling.

Despite a weight of 149 kilogrammes, the carriage with large wheels allows to easily transport the device from one location to another. When installed in its desired place, the IDS 100 also provides the possibility of connecting an air transport hose with a length of 7.6 metres, since a hose connector is already included in the standard scope of delivery. Optionally you can attach a two-way hose distributor to the IDS 100 if required.

IDS indirect oil heater fans – maximum heating power, clean warmth

The indirect oil heater fans of the IDS series are ideally suited for rooms in which ventilation is only possible to a certain extent, but which are still used by people or animals. They are also a good choice for speeding up construction drying as well as in rooms where there is a fire hazard due to combustible substances.

In principle, the combustion process is identical to that of the IDS direct oil heater fans: The fuel is drawn from the tank by means of a pump, brought to operating pressure and in a final step is sprayed into the combustion chamber via an atomiser nozzle as an air-fuel mixture, where it is then burnt. In the case of indirect heaters, however, the air to be heated is fully isolated from the combustion chamber.

Although with indirect oil heater fans the air provided for heating is drawn by the same blower as the combustion air, it is yet guided separately past the increased surface of the combustion chamber, the heat exchanger, so as to be able to heat up there without being mixed with the flue gas in this process. Whereas the combustion products are discharged to the outside via a chimney, 100 % emission-free warm air is spreads through the outlet opening of the indirect oil heater fan.

Thus, in order to obtain both clean and dry warmth, we recommend using an indirect oil heater fan. In contrast to direct heaters, in this case neither combustion products nor released water vapour enters the room air if a suitable flue gas evacuation has been mounted on the device’s chimney, leading the flue gases outside of the room to be heated.

Functional diagram IDS 100
The IDS 100 offers a wide range of applications

The IDS 100 offers a wide range of applications

The combination of the carriage design with mobile use, integrated fuel tank and a maximum rated heat output of 117 kW makes the indirect oil heater fan IDS 100 a versatile heating solution for a large variety of applications, for instance:

  • Heating of workshops
  • Heating of stables
  • Temperature control of storage facilities
  • Heating of interior spaces of construction sites
  • Clean hot air for festival marquees or exhibition halls
  • Heating of glass or foil greenhouses

For heating interior spaces, the exhaust air of the oil heater can be discharged from the room by mounting a flue pipe to the stainless steel chimney of the IDS 100 and leading it outside.

Instead of large-volume air heating, the oil heater fan IDS 100 additionally allows for spot heating via hot-air hose. The hose connector required for fitting is optionally available on request as an accessory part – also as two-line hose distributor for simultaneous spot heating of two workplaces. And for longer continuous operation, instead of using the integrated tank, an external oil tank can be used to supply the IDS 100. The connection kit required for this purpose is available as an optional accessory part.

VIDEOS: Trotec oil heater blowers live in action

In our Youtube playlist we have compiled exciting projects that users have realised with Trotec oil heater blowers. The application possibilities are manifold and the tinkerers have implemented their personal vision of a warm working environment with a lot of ingenuity and commitment. Very inspiring!

VIDEOS: Trotec oil heater blowers live in action

Special equipment features of the oil heater fan IDS 100

Thanks to the carriage design with the push bar frame and front wheels, the oil heater fan IDS 100 can be easily transported from one point of use to the other.
Practical carriage design
To prevent the connecting cable from becoming a trip hazard during transport, an integrated cable holder allows for fastening the connecting cable safely whilst the device is transported.
Cable holder for safe storage during transport
For automatic operation, the operating panel which is recessed for protective purposes is equipped with a connection for an external thermostat by means of which the temperature can be measured and controlled at a location to be heated that is up to 10 metres away (a thermostat is optionally available).
Connection for external thermostat
In addition to the attachment option of a rain cover, a flue pipe can also be be mounted on the stainless steel chimney of the oil heater fan, for example for wall or chimney ducts for the heating application in interior spaces.
Stainless steel chimney with connection for a pipe or rain cover
The IDS 100 comes equipped with a two-line heating system with an easily accessible external fuel filter. Furthermore, an oil pre-heating is optionally available.
Readily accessible fuel filter
The integrated tank can be filled easily and has a storage capacity of 135 litres of fuel – enough for almost 13 h of maximum operation. Optionally, a connection kit for an external oil tank is available for continuous operation.
Integrated 135 litre tank
Continue directly to the practical knowledge guidebook for professional heating

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating


To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator


A few practical benefits:

  • Integrated oil burner with Suntek pump
  • Electronic flame trap
  • Overheating thermostat
  • Stainless steel combustion chamber
  • Heat exchanger
  • Fully automatic after-cooling
  • Double-walled housing for optimum soundproofing and insulation
  • Integrated fuel tank
  • Suited for the fully automatic application with external thermostat or timer switch
  • Oil pre-heating (optional)
  • Connection facility for air transport hose

Technical data by comparison

All oil heater fans of the IDS series by direct comparison:

To find the IDS oil heater fan which exactly meets your requirements, please consult the concise overview of all devices from the Trotec IDS series, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison


Buy

IDS 100 High Output Indirect Heater show in Trotec online shop

Technical data

Technical data
General information
  Article number 1.430.000.140
Functional principle
  Oil
  Method of heating indirect
Air flow rate
  Level Max. [m³/h] 5,550
Fan
  axial
Nominal heat input
  Level Max. [kW] 117.26
Nominal heat output
  Level Max. [kW] 117
  Level Max. [kcal] 90,748
Temperature increase
  Level Max. [°C] 75
Electrical values
  Mains connection 230 V, 50 Hz
  Current consumption [A] 8.35
  Power input [kW] 1.82
  Heating capacity [kW] 117
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.5
Operation
  Connection for external thermostat
Fuel feed
  Fuel feed Suntec pump
Fuel filter
  Available
Oil consumption
  Level Max. [l/h] 10.79
Kraftstofftank
  Content [l] 135
  Metall
Hose connection
  Diameter | Hose connection [mm] 500
Chimney connection
  Available
  Diameter | Chimney connection [mm] 150
Sound values
  Distance 1 m [dB(A)] 76
Suitable fuels
  Kerosene
  Diesel
  EL fuel oil
  Low-sulphur EL fuel oil
Dimensions
  Length (packaging excluded) [mm] 1,870
  Width (packaging excluded) [mm] 660
  Height (packaging excluded) [mm] 1,210
Weight
  (packaging excluded) [kg] 149
Equipment, features and functions
Mobility
  Carry/transport handle(s)
  Wheels
Housing design
  Steel
Safety feature
  Overheating protection
  IPX4

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Seminars

Downloads

Loading...

Videos