Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Cutting and roughing disc set of Trotec brand quality
Cutting and roughing disc set of Trotec brand quality
Cutting and roughing disc set of Trotec brand quality
  1. Products & Services
  2. Powertools
  3. Tool accessories
  4. Cutting/roughing disc set 125

Cutting and roughing disc set

Eleven discs in a special offer pack – our pro selection for economical cutting, grinding or deburring

Professionelle skæreskiver i henhold til EN 12413

Reliable cutting and roughing discs are indispensable accessories for hand-held angle grinders. After all, the discs' maximum circumferential speed of 80 m/s corresponds to the speed of a racing car at 288 km/h. Therefore, put your trust in the safety provided by brand cutting discs of professional quality – for instance favourably calculated in a convenient complete set:

This 11-part accessories set can be used with all hand-held angle grinders and contains five metal cutting discs AD 125 M, five stone cutting discs AD 125 S and one metal roughing disc AD 125 MG – all of them of Trotec brand quality with an MPA test certificate:

All cutting and roughing discs in this set have a fibre-reinforced synthetic resin bonded fabric keeping the abrasive grains at an ideal distance from each other and thus guaranteeing best material properties for tough use and dry cutting at a high circumferential speed of up to 80 m/s.

Due to their depressed-centre design, the discs' structure is additionally reinforced, which contributes to an improved and stabilised guidance for clean cutting and grinding.

Metal cutting disc AD 125 M

Metal cutting disc AD 125 M

Thanks to grain size 36, hardness P and a cutting width of 3.2 mm for a longer lifetime and high resilience, this cutting disc is the ideal solution for economical cutting of metal and sheet metal.

The abrasive used on the AD 125 M is corundum specially suited for metal, which – being the fourth hardest mineral in the world – is characterized by an enormous toughness. This is why it is particularly well suited for high cutting performance.

5 discs included in the set

Stone cutting disc AD 125 S

Stone cutting disc AD 125 S

The bonded silicon carbide abrasive on this disc has a high degree of thermal conductivity, which – combined with the material's hardness – makes silicon carbide abrasive grains the ideal abrasive for mineral materials.

For this reason the AD 125 S with grain size 30, hardness P and a cutting width of 3.2 mm for a longer lifetime is the ideal solution for fast cutting of concrete, natural stone, roofing tiles or sand lime bricks.

5 discs included in the set

Metal roughing disc AD 125 MG

Metal roughing disc AD 125 MG

This disc contains corundum bonded in multiple glass-fibre layers, which is specially suited for rough-grinding of metal. Corundum is extremely tough and therefore particularly well suited for high cutting performance with high grinding action.

With a thickness of 6 mm, grain size 30 and hardness P the AD 125 MG is a particularly efficient cutting accessory even at low contact pressure, and is ideally suited for economical processing of weld seams and surfaces.

1 disc included in the set

A few practical benefits:

  • Professional cutting discs in accordance with EN12413
  • Trotec brand quality with MPA test certificate (Materials Testing Office)
  • Complete set for processing stone and metal
  • High lifetime for effective, cost-saving working
  • All cutting discs in depressed-centre design with fibre-reinforced synthetic resin bonded fabric (BF) for a high degree of stability

Important features at one glance:

Disc diameter 125 mm
Rotational speed 12,250 min-1
Max. circumferential speed 80 m/s
Hole diameter 22.23 mm
Disc thickness 3.2/6 mm
Depressed-centre design
Ideal for fast, economical dry cutting
Ideal for grinding, deburring and smoothing
Ideal for processing stone materials
Ideal for processing metal materials

Buy

Cutting and roughing disc set (11-pieces) show in Trotec online shop

Cutting and roughing disc set (11-pieces)

You save: 37 %

7.95 £ 4.95 £ incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 6.225.001.131

 standard equipment

 optionally available

 not available

Downloads

Loading...